Watching: Kitchen remodeling ideas | Home Office Furniture Videos

Video scenes shots:

Watch the video:

URL:
Embed:

Display Video Comments | Hide Video Comments | Add Comment

Latest comments made on this video:

Awsome job, I was ...
By: xanevia. on 23 Nov 08, 17:52:17
Awsome job, I was looking at all the ideas and soon have to convert a rea into a living area. major work, not a lot of money. Love the appliances all covered. PS CAT is GREAT! and very true, they are watching to see everything..lol

The counter was ...
By: AsktheBuilder. on 13 Nov 08, 22:31:26
The counter was cleaned. When you have cats in a house they are always up on counters. Especially when you're out of the room or sleeping. We always clean the counters before use because of this. My wife loves cats. So if I don't like it, I can move out. :->

I had a lot of ...
By: strawberryfields789. on 13 Nov 08, 22:09:04
I had a lot of respect for you until I saw the cat's bottom on the counter. Bad!!!

Nice kitchen! I ...
By: shikira. on 29 Jul 08, 14:05:55
Nice kitchen! I love the accents. I've just finished doing my kitchen - its beautiful but it was a big job!

Tim, Great ...
By: Yournewkitchen. on 29 Jul 08, 00:22:03
Tim, Great kitchen design. It looks as though you took your time and planned the remodel very well. It is amazing how much goes into the complete remodeling of a kitchen and how hectic things are around the house during that time but you can sure see from your video it was well worth it. 3 months is a long time to eat out but its worth it for the years of enjoyment that space will give you. Great job!

I have columns ...
By: AsktheBuilder. on 27 Jul 08, 22:01:22
I have columns about this situation at my website. Read many of the columns in my Structural category.

I have a short ( ...
By: mahiney8184. on 27 Jul 08, 21:50:19
I have a short (less than 5 feet) load bearing that I want to remove between my living room and kitchen. Do you have a video on how to do this? or have any advice? Thanks. I am a do-it-yourselfer, but would not mind paying someone to keep our roof from colapsing.

Crazy name...... ...
By: AsktheBuilder. on 08 Apr 08, 11:09:16
Crazy name...... Little Kitty Don't blame me, I had nothing to do with it. :-/

I love your kitchen ...
By: salas48. on 08 Apr 08, 06:54:42
I love your kitchen Tim! BEUTIFUL! p.s. nice cat!what his or her name?

Nice work. like ...
By: Metoofilms. on 17 Feb 08, 16:31:28
Nice work. like your videos

They are cherry. ...
By: AsktheBuilder. on 02 Feb 08, 12:36:42
They are cherry. Visit a Woodmode dealer and you will see the sample. The wood looks different colors under different light sources, so be careful when making your decision.

Mr. Carter, those ...
By: mbcelestino. on 02 Feb 08, 02:03:29
Mr. Carter, those are beatiful cabinets! Are they cherry wood? What is the name of the stain color? Great job, love the website!

We are in the ...
By: bradford1959. on 05 Dec 07, 02:16:17
We are in the process of redoing our kitchen now. We like Lowe's but they didn't have the cabinet style we wanted. We are now going with a frame-less style called Premier (only in Home Depot). It's made by Kraftmaid though. The price for about 25 cabinets was around $9k (nearly half the price of other brands). The next biggest thing is who we are working with at HD. You need to find someone who really is knowledgeable & will work well with you.

You have to be ...
By: AsktheBuilder. on 14 Nov 07, 11:44:24
You have to be careful no matter who you hire. I have all sorts of tips at my website about hiring contractors.

looks like a great ...
By: bestcontractor. on 14 Nov 07, 06:46:27
looks like a great job well done

I like alot of wood ...
By: prrolg. on 17 Oct 07, 00:18:30
I like alot of wood in a library but I like to see the appliances in a kitchen. More user friendly. More outdoor light too.

i am kinf of ...
By: pollstarjunkie. on 11 Sep 07, 22:44:39
i am kinf of skeptical about any contractors. im a single girl, and dont trust any of these people. Home Depot is quite popular.. but they even lied to me.. right in my face about prices.. and that was the SECOND time i saw them about the door. i guess they couldnt think of the lie, on the first visit

I didn't use Lowe's ...
By: AsktheBuilder. on 11 Sep 07, 21:28:59
I didn't use Lowe's.........

wow, my kitchen is ...
By: pollstarjunkie. on 11 Sep 07, 18:42:13
wow, my kitchen is a little like that, with the wall seperating it from the breakfast room. i have wanted to remodel this kitchen for a long time, but i just dont think i have the money. what about Lowe's home improvement...any good?

coolness :D
By: ZodiacKilah. on 30 Aug 07, 20:29:45
coolness :D

nice kitchen it ...
By: hugens26. on 12 Aug 07, 02:18:41
nice kitchen it must have cost you alot

Yes that guy does ...
By: HomeRemodelWorkshop. on 09 Aug 07, 19:50:38
Yes that guy does look like one tuff SOB lol BOB

I wish! The retail ...
By: AsktheBuilder. on 09 Aug 07, 15:28:52
I wish! The retail price on just the cabinetry - with NO labor - was $70,000. The appliances alone were $18K. That job was well into the six figures.... Gulp! But my wife *really* deserved it. She has wanted a kitchen like this for 35 years. It was the least I could do for all she puts up with from me.

wow Tim, that's a ...
By: rthereanyleft. on 09 Aug 07, 13:28:01
wow Tim, that's a beaut!...can we ask what that baby set u back...my guess $40,000 ish??

Our lead carpenter ...
By: AsktheBuilder. on 09 Aug 07, 11:31:34
Our lead carpenter was fantastic, but the tile floor almost did him in. Tearing out that tile was a horrible job. Hours and days of beating on the floor. He loved kicking drywall. I think he does cage fighting as a hobby.

Other videos by this author:

How to Make a Video
Posted by: AsktheBuilder

Video duration: 617 seconds

Tim Carter from AsktheBuilder.com demonstrates the equipment and techniques you need to film a good video. Discover a wealth of secret tips while watching this informative and humorous video. Tim shares his eight years of network television experience to help you create professional videos.

Related: ask, builder, carter, how, make, tim, to, video, videography

Display Video Comments | Hide Video Comments | Add Comment

Latest comments made on this video:

Shut the Dam MOOER ...
By: RoN23Marsala. on 23 Nov 08, 02:47:25
Shut the Dam MOOER off!

Ok, i didn't listen ...
By: XxHorseluver29xX. on 13 Nov 08, 22:12:50
Ok, i didn't listen to this because i want to know how to "make a video" what program and things

same here ...
By: josemed300. on 11 Nov 08, 05:38:23
same here raymaster184

great video! it ...
By: raymaster184. on 09 Nov 08, 04:43:31
great video! it helped a bit. your advise is really good :)

You digitize them. ...
By: AsktheBuilder. on 08 Nov 08, 12:17:53
You digitize them. Go Google that. Converting video tape to digital files.

I don't have that ...
By: Whitflowers676. on 08 Nov 08, 02:42:04
I don't have that much money in my bank account so how do u upload vids on youtube with an old camera like the ones with the tapes inside?!

uhmmm..... right
By: lordilotr2. on 06 Nov 08, 17:06:04
uhmmm..... right

I wish I had a ...
By: AsktheBuilder. on 05 Nov 08, 17:01:48
I wish I had a dollar for each time I've typed this response in a comment. We started with iMovie and now use Final Cut Pro. Next time read through many of the previous comments.

Can I ask this ...
By: razfrog. on 05 Nov 08, 16:54:24
Can I ask this question....I NEED AN ANSWER!!! Please can you tell me the software that you use to make movies to go on youtube! Windows Movie Maker doesn't work for me! x

It was really ...
By: noahmarsden. on 03 Nov 08, 00:51:32
It was really refreshing to hear more about presenting than just technical stuff. The only problem I had, is that I just didn't get enough. Really good, very informative video. Do you plan on doing any more videos of this nature? Keep up the great work.

Awesome vid Tim! ...
By: StinkyKnobcheese. on 02 Nov 08, 04:01:09
Awesome vid Tim! I'm a newbie and there's lots of vids about technical shots etc but few about presenting yourself. Thanks a bunch!

I'm a big fan of A ...
By: AsktheBuilder. on 01 Nov 08, 20:40:42
I'm a big fan of A / B testing. I suggest you not get the things I say and do some videos. Then compare them in quality to any number of mine or others who use good equipment. Since we have already done the A part of the test, you do the B part.

WHO THE ! HELL ! ...
By: HazzaH171. on 01 Nov 08, 19:59:12
WHO THE ! HELL ! would get all this PROPER stuff just to make a good vid ...

thanks a lot for ...
By: thesniffysniffy. on 31 Oct 08, 12:52:20
thanks a lot for this video... i don't want to make informative vids, i really want to make beautiful ones of nature and a sexy girl (gf)... but this helped very much with my hobby thanks very much i appreciate your video

Are you serious???? ...
By: AsktheBuilder. on 31 Oct 08, 10:46:35
Are you serious????? You must be joking. Surely you jest. Are you saying that those of us that take the time and effort to produce all these informative videos should do so for free? In other words, I should pay the videographer and post production person out of my own pocket just for your benefit? Then what about Google? They should have 250 people or more at YouTube and 5,000 servers spinning for free as well? Today is Halloween, not April Fools Day....

just get a webcam ...
By: blakehutube. on 31 Oct 08, 07:30:19
just get a webcam and windows movie maker. done :)

Average because I ...
By: belroyce. on 31 Oct 08, 02:42:03
Average because I could not see it without the wonderful 'ads by Google. window in the middle of the vid. Thanks a lot!

What? There must be ...
By: AsktheBuilder. on 30 Oct 08, 22:57:50
What? There must be something in the water over there in the UK. Seventy-five percent of the video is about technique.

This Is Rubbish ...
By: eagle12eye. on 30 Oct 08, 22:31:08
This Is Rubbish It Is Basically Telling You To Buy Buy Buy

"Shut the Damn ...
By: jamesccostello. on 27 Oct 08, 20:30:26
"Shut the Damn mower off!" I laughed so hard. Thank you Tim!

3:30 is great
By: runningduo. on 26 Oct 08, 21:51:05
3:30 is great

jujumagumbo?
By: PlaysWithSquirrles14. on 22 Oct 08, 21:53:14
jujumagumbo?

try and see, keep ...
By: bigdaddytom1973. on 20 Oct 08, 02:18:07
try and see, keep practicing. I have a svp 8600, with no light no mic. be carefull with background noise. my camera gets very staticly. but keep trying, i also use windows movie maker to edit..

thx. Ure a really ...
By: SuburbianKnights. on 16 Oct 08, 21:37:58
thx. Ure a really awesome guy. And i love ure videos!

You can do whatever ...
By: AsktheBuilder. on 16 Oct 08, 10:52:29
You can do whatever you want.... No need to ask permission.

3 Way Switch
Posted by: AsktheBuilder

Video duration: 388 seconds

Installing a 3 way switch can be simple with this advice from Tim Carter of AsktheBuilder.com. He'll walk you through wiring 3 way switches, showing you which wires go where so you'll have no trouble with your 3 way switch wiring.

Related: ask, builder, carter, home, house, how, switch, switches, three, tim, to, way, wire, wiring

Display Video Comments | Hide Video Comments | Add Comment

Latest comments made on this video:

it needs wirenut ...
By: alfrediux1980. on 02 Dec 08, 00:13:26
it needs wirenut the ground or just the neutral?

Cool video Tim ...
By: Blackseed1978. on 28 Nov 08, 00:42:13
Cool video Tim thanks for the post i'm in school now studying to become a electrical technician and this information was informative i just learned how to do a two way switch and now when i go to class and learn the three way switch i will be ready and have the knowledge already so thank i appreciate it

im doin this at ...
By: lgr1991. on 25 Nov 08, 23:18:10
im doin this at college and thanks for clearin tht up, i was confused with two switches for ages!!!

im from ireland and ...
By: nealo7. on 25 Nov 08, 07:05:36
im from ireland and its called 2 way switching

Hello im from ...
By: Goodfellas3000. on 21 Nov 08, 06:59:35
Hello im from united kingdom i understood your two way swith perfectly thanx.. the only problem is the wiring in uk is slightly diffrent we have the main running into the light as a loop coming from the other light and from that light we are running a swith wire to the 1st switch and from the 1st swith we run a 3 core and earth to the other the second switch to make it 2 way!

I'm taking basic ...
By: dantheone. on 21 Nov 08, 03:37:57
I'm taking basic electrical class at the moment and this video helped me a lot with this subject. Thanks for the video. :)

Did you not turn ...
By: AsktheBuilder. on 16 Nov 08, 23:37:15
Did you not turn off the circuit breaker???? You shorted the circuit. Fix that with a new fuse or reset the breaker. You better watch my videos again and pay attention to the safety warnings.

Im14 and i was ...
By: White2424. on 16 Nov 08, 23:25:34
Im14 and i was takingout one ofmy light switches( w/o turingoffelectricity) When i was taking the switch out a HUGE purple spark blew. Now i cant get the 2 switches thatrun the same to turn on my dining room light! Please help!

yeah leave this to ...
By: britski87. on 13 Nov 08, 13:11:06
yeah leave this to the "experts" they could easily charge you 250.00 to do this hookup that a moron can do with his eyes closed

Congrats! You're ...
By: AsktheBuilder. on 10 Nov 08, 17:17:36
Congrats! You're most welcome.

Hello Tim. I ...
By: Smikos01. on 10 Nov 08, 16:39:00
Hello Tim. I would like to thank you very much for providing your valuable knowledge to You Tube Users! Installing a 3 way switch under your direction was extremely easy. I watched your video once and installed the 3 way switch without a problem. Thanks Again!

did you wire nut ...
By: meantraitors. on 04 Nov 08, 08:11:26
did you wire nut the grounds???

Yeah haha I was ...
By: Color1377. on 02 Nov 08, 19:10:59
Yeah haha I was just joking in my earlier comment, no offense meant :)

Oh my Gosh! Phil ...
By: AsktheBuilder. on 02 Nov 08, 10:53:41
Oh my Gosh! Phil used iMovie royalty-free music as well. I since have changed over to my own sound bed I paid to have composed.

SXEPHIL MUSIC WTF
By: Color1377. on 02 Nov 08, 01:33:53
SXEPHIL MUSIC WTF

Looking at this ...
By: CarmenT41. on 31 Oct 08, 19:42:41
Looking at this video it's become apparent that a twit wired my hallway. One box had two wire bundles coming into it, but had a black and white wirenutted together, and a white, black and a red wired to the switch. The other box only has one wire bundle coming into it, with the white, red and black all wired to the switch. I was replacing all switches and outlets in my 30yr old home, wondered why the hallway wasn't working properly. Still can't get both switches to operate the lights. Sigh.

The 3 Way Switch ...
By: smfb8. on 28 Oct 08, 02:38:02
The 3 Way Switch video had me wiring up my flood lights in no time. Thanks for the help.

You're most welcome ...
By: AsktheBuilder. on 25 Oct 08, 21:34:23
You're most welcome. Be sure to go to my website to read the columns about the same topic.

Thank you Tim for ...
By: chadforeman74. on 25 Oct 08, 19:25:21
Thank you Tim for the educational, detailed instructions. Your video was very helpful and saved me a lot of time.

Gentlemen, it's not ...
By: AsktheBuilder. on 25 Oct 08, 18:48:11
Gentlemen, it's not required here in the USA. If you find that unsafe, lodge your complaint with the NFPA. They are the code body.

Thank you very much ...
By: rog0077. on 25 Oct 08, 18:18:26
Thank you very much for this helpful video. I've got your link from the employee at the biggest renovation store here in Montreal, Canada.Now I'll go install my 3way-switch;sure after cutting off the power.Best regards.Rog.

Yeah I noticed that ...
By: laoislad. on 25 Oct 08, 15:03:52
Yeah I noticed that too...Wouldn't dream of not putting sleeving over the earth wire

plus he put no ...
By: brownie892. on 20 Oct 08, 23:36:21
plus he put no sleeving on the earth or ground as he called it

Hmm interesting ...
By: MetallicaUK. on 20 Oct 08, 18:21:11
Hmm interesting where im from we have 3 wires, a Brown wire (Live) a blue wire (neutral) and a yellow and green wire (earth) btw i live in England :)

You don't have to ...
By: NSResponder. on 18 Oct 08, 07:53:47
You don't have to be licensed to do work on home wiring in the USA, you just have to be licensed to charge money for the work (in some jurisdictions.) -jcr

Installing an Exterior Door
Posted by: AsktheBuilder

Video duration: 378 seconds

Exterior door installation is a job you can tackle with these tips from AsktheBuilder.com host Tim Carter. From flashing to putting in shims, Tim walks you through all the steps for installing an exterior door in your home.

Related: an, ask, builder, carter, door, doors, exterior, how, installation, installing, outer, tim, to

Display Video Comments | Hide Video Comments | Add Comment

Latest comments made on this video:

just put in a new ...
By: marathon300. on 13 Oct 08, 23:50:20
just put in a new door just like 12santo1 said. whooops! guess what? got leaks when it rained. do like the video says.

It is obvious to me ...
By: AsktheBuilder. on 04 Sep 08, 11:06:37
It is obvious to me and any number of pros that you have perhaps never had to replace a door before. If you had done that to any exterior door that was exposed to splashing water or wind-driven rain, you would know why flashing is mandatory. If you want to see one of these doors, come to an existing house I just purchased. Caulk is not a permanent solution in this situation.

wow,i can install ...
By: 12santo1. on 04 Sep 08, 04:39:05
wow,i can install that door by myself...... this video is really for non-skilled people. why would you put the flashing tape? you know water gets everywhere... there is no need to install that tape. just use treated wood... as easy as that or, caulk the inside to prevent water from flowing inside the stucture.....

Treated lumber for ...
By: AsktheBuilder. on 23 Jul 08, 13:20:22
Treated lumber for the rough opening and redwood or cedar for the trim.

Question: I ...
By: ralotomassi. on 22 Jul 08, 17:48:32
Question: I haven't started my project yet, but in assessing the scope of the task, it appears that my entire opening is concrete as it is to a basement door. Also, this entire opening is about 4 1/4 inches wider than the door frames that I have priced at the store. Would it be a good idea to "build in" the opening before I installed the new door using a 1 X ? What type of wood would I use? Thanks in advance.

You're the man! ...
By: lordtone1. on 01 May 08, 14:44:04
You're the man! That could not have been explained any easier. Thanks, and keep up the good work!

Hi Tim, I own my ...
By: vinny3888s. on 11 Jan 08, 23:08:55
Hi Tim, I own my own Handyman business and I've got to tell you , I am so glad to have your videos online, even though I know my stuff, you always point out one add extra thing I didn't know about. Thanks, Vinny

The job you are ...
By: AsktheBuilder. on 11 Jan 08, 16:29:56
The job you are trying to do is one I would never ask a rookie carpenter to do, much less a DIY'r! You are in over your head.

I'll look into one ...
By: mykallb. on 11 Jan 08, 16:02:32
I'll look into one of those doors, but there really isn't a problem with my door, it's the jambs which will have to be replaced anyway. Maybe I'm not understanding this, but will buging a pre-hung simplify the problem of replacing the jambs? Thanks MB

I doubt I will ever ...
By: AsktheBuilder. on 10 Jan 08, 11:59:58
I doubt I will ever do that one. Way too focused.... Why not just invest in a new prehung fiberglass door unit from ThermaTru? I have had great success with them. You can have a new door installed in 90 minutes or less.

I'd sure like to a ...
By: mykallb. on 10 Jan 08, 04:18:35
I'd sure like to a video on how to install cellularized PCV Door Jambs and moulding. Mine has rotted out BIG time (worse than I thought) and I bought the kit from Home Cheapo but have hesitated because it's my front door and if something goes wrong, I won't have a front door ;). I'm really worried about routing the hinge inlays in the door etc. Most of these door hanging vids are for pre-hung doors-unfortunately. M.

Joe, Not at all! ...
By: AsktheBuilder. on 07 Nov 07, 12:21:15
Joe, Not at all! You want difficult? Let's see, I will mention a few tasks off the top of my head. How about framing a 14/12 pitch roof with a dutch hip? How about building a deck that is 30 feet off the ground. Now, those two are difficult..... :-)

this seems like the ...
By: JoeFox1014. on 07 Nov 07, 01:53:58
this seems like the most difficult thing in the world to do. ever.

The first thing to ...
By: AsktheBuilder. on 31 Oct 07, 20:29:30
The first thing to do is check ALL screws on both flaps of each hinge. Tighten them. That often helps solve door-rubbing issues. If house settlement is the cause, the measures are more drastic like you propose.

I have some ...
By: E5Bobby. on 31 Oct 07, 20:06:45
I have some interior doors that are very old. The door can be lifted up a bit and when let down it seems to drag against the jamb on the upper corner on the doorknob side. Do I use a belt sander to take some wood off of the door? That'd be great to see in a video.

Nice video. Wow ...
By: Ryder69420. on 30 Oct 07, 01:12:12
Nice video. Wow that seems really easy. Noticed around 3:50 how easily that door swings opened. Doesn't even need help. ;)

Sure! Especially if ...
By: AsktheBuilder. on 01 Oct 07, 11:04:02
Sure! Especially if the plumber is cross trained. You know the old saying about putting all of your eggs in one basket.

installing doors is ...
By: ZodiacKilah. on 02 Sep 07, 16:39:05
installing doors is a plumbers job right? becuase im going college this 10th sep and im doing a plumbing course and hoping i will be able to do those things ;)

Great point and ...
By: AsktheBuilder. on 25 Aug 07, 11:32:05
Great point and thanks for suggesting it! I intend to do a series of videos on door installation. It is impossible to cover everything in two minutes. The series will dive into each specific common problems and how I have successfully solved each one. For example, a twisted rough opening, an out-of-level floor, door binds on door stop, door fails to latch, etc.

A good start to ...
By: roynash. on 25 Aug 07, 10:31:53
A good start to understanding the important steps. Most of us wouldn't have an opening that level and plumb, so how about one to show some problems/solutions.

Thanks for all the ...
By: bassaroo. on 21 Aug 07, 13:47:27
Thanks for all the helpful info!

Dear so1iant, I ...
By: AsktheBuilder. on 24 Apr 07, 03:28:37
Dear so1iant, I have this video and another one that pretty much shows the important steps how to remove the door.

Hello Tim, Thanks ...
By: so1iant. on 24 Apr 07, 00:25:59
Hello Tim, Thanks for all the good tips! I have to say I am flustered not to find *any* tips/videos about install exterior door from scratch. Cutting it out and all. Maybe you have some old footage you could post?

Toilet Flapper Valve 7seveng7
Posted by: AsktheBuilder

Video duration: 576 seconds

Tim Carter, of http://www.askthebui lder.com, helps YouTuber Paul of the 7seveng7 channel diagnose and fix his leaking toilet.

Related: 7seveng7, ask, builder, carter, flapper, fluidmaster, leak, paul, tim, toilet, valve

Display Video Comments | Hide Video Comments | Add Comment

Latest comments made on this video:

Turns out my chain ...
By: talisman227. on 27 Sep 08, 04:10:45
Turns out my chain length was ok. It seems that the a universal flapper is equipped with a ring as part of the mold which slides down the overflow tube as when you install it. This ring keeps tension on the arms of the flapper and doesn't allow them to pivot when flushed. The tension forces the flappper down unless you hold the flush handle down. I just simply cut each end of the ring where it attaches to the arms and it did the trick. Whats that annoying ring for anyhow? water saving maybe?

The chain is still ...
By: AsktheBuilder. on 22 Sep 08, 12:04:30
The chain is still too long. Keep tinkering.

Hi Tim. My ...
By: talisman227. on 22 Sep 08, 03:06:46
Hi Tim. My flapper in our ensuite toilet was allowing a small constant trickle of water through. I rescently replaced it with another flapper. It wasn't identicle to the old one but it still fit like a glove. The leak stopped but now we have to hold the flush handle down for a few seconds or it will close immediately and not allow the flush to complete. I tinkered with the chain length from the arm to the flapper but no luck. Any suggestions?

Thanks for sharing ...
By: AsktheBuilder. on 10 Sep 08, 13:18:43
Thanks for sharing that. I also get those weird looks, especially from my kids.

That happened to me ...
By: mortson978. on 10 Sep 08, 03:15:17
That happened to me once. I was cleaning a gutter, and my hands were filthy. I went into the bathroom to wash up, and to my surprise, the town had shut off the water. Luckily, the toilet tank was full, and i washed up there. When i told people about this auxiliary supply of water, they said i was weird, and that it was nasty to stick my hands in the back of the toilet.

what? most ...
By: levimcdaniel. on 13 Jul 08, 20:00:22
what? most people water is all coming from the same source, i have never heard of using gutter water for a toilet.

Hey saw the toilt ...
By: sandspoint. on 02 Jul 08, 03:30:37
Hey saw the toilt flap fix you are so cool Im in miami and im hooked. Im doing tile in a condo and the manager is given me a prob on the 1/4 inch cork sound proofing. He says I should get more ya but it costs allot more to have it installed.

Try adding a cup of ...
By: AsktheBuilder. on 19 Feb 08, 19:05:57
Try adding a cup of chlorine bleach and letting it soak for an hour. Then use a toilet brush on a spot you can scrub. It should work.

Before my question, ...
By: cpspot. on 19 Feb 08, 18:50:40
Before my question, I'd like to thank you guys for putting such useful content on You Tube. It's appreciated. The question: My toilet functionally works, but inside the reservoir tank, everything below water level is coated with a black film. The water in it is clear, but the tank full of a black residue. I posted a video of it, but youtube won't let me link to it in this text response. It's easy to find if you click my name. Can you suggest a chemical to clean this? Thanks!

I for one would ...
By: abram730. on 17 Feb 08, 23:38:51
I for one would like to thank you for enriching the world with this content. IT was first with writing that those that solve problems could first have there solutions recorded so that humanity could advance. By not having to continue to rediscover the same solution every time that problem came up.. you are creating solution that people can access at any time and from all around the world. Something to :) about. "good info, BUT" nothing.

To : nununya your ...
By: abram730. on 17 Feb 08, 23:08:37
To : nununya your body is 10 trillion human cells and about 100 trillion microbes. If you removed the 100 trillion microbes from yourself you'd most likely die. Only a few types of microbes are bad. The anti-bacterial mind set is helpfull when a person is sick. I'd point out that taking a young child to say a farm to play with the Animals and inhale powered fecal mater and all the microbes in such dust has been shown to significantly lower asthma and allergies.

You know the old ...
By: AsktheBuilder. on 14 Feb 08, 18:57:49
You know the old saying about pleasing people........ No matter how I do a video, there is *always* a person who feels compelled to complain...... I can understand it if you are *paying* for the content, but holy smokes, you get it for free. (still shaking head as he goes to the next comment....) You gotta love YouTube for exposing every aspect of humanity. Thank you Chad and Steve!

Good info, BUT the ...
By: CoolasIce2. on 14 Feb 08, 15:45:45
Good info, BUT the cutsy over- the- phone BS is a waste of time and a distraction. Fluidmaster has the best products. They completely rule the toilet repair parts business.

It isn't the same ...
By: Bretty135. on 31 Dec 07, 18:51:25
It isn't the same water which you drink if you have got a rainwater circuit which you use for flushing the toilet etc. which gets collected from the gutters. It is starting to be introduced in the UK because of price increases.

Excellent Video! ...
By: gbpvr. on 25 Nov 07, 17:17:37
Excellent Video! Thanks

I like how you ...
By: 1pic. on 21 Nov 07, 01:14:07
I like how you deduced the fixture problem. Please check out my home depot contest video.

If you are on city ...
By: nununya. on 05 Nov 07, 14:37:01
If you are on city water, usually there is chloramine or chlorine dioxide in your water. But I believe the toilet tank gets contaminated from the mold that grows in the tank above the water line. If you use untreated well water, tank water is stagant water=lots of bacteria. In an emergency, I think you could treat either type of toilet tank water with halazone tablets or boil it to get drinking water.

Fluid Master ...
By: HVACEMT. on 13 Oct 07, 05:39:47
Fluid Master Adjust-a-Flush is the most reliable and adjustable flapper I have found.

This is an October ...
By: WeShowTeamKlaus. on 04 Oct 07, 20:17:45
This is an October TOP 10 video on the WeShow Awards UK Edition. It has been selected by our team of editors as a nominee in the Learning > Do-it-yourself > Home Improvement channel and is running for best of the month in the world's greatest online video contest. Check out its competitors and vote until October 7. WeShow - The Best Videos Everywhere

The video was just ...
By: AsktheBuilder. on 07 Sep 07, 21:24:06
The video was just about telling Paul he needed a new flapper valve kit. I am doing another video to show *how* to install it.

Awesome, thanks!
By: viviananderson. on 05 Sep 07, 14:13:57
Awesome, thanks!

Great videos, Tim!! ...
By: rewsnat. on 01 Sep 07, 04:35:58
Great videos, Tim!!! Enjoyed this one and all the rest also...

Oh I'm so glad I've ...
By: ZodiacKilah. on 30 Aug 07, 20:13:07
Oh I'm so glad I've got a place in my college to do Plumbing I !!! and well come Tim great job on the videos maaaaaan ! :))

Wow Tim, different ...
By: freespeachrulez. on 30 Aug 07, 14:45:20
Wow Tim, different format but very thorough.. It was basicly step by step, now what about loosing the chain or adjusting the height of the chain or bending that rod that connects to the ball, some turn in and out..?

Sigh! Man is a huge ...
By: AsktheBuilder. on 29 Aug 07, 10:53:14
Sigh! Man is a huge crutch word for me. I also say "Dude" too much. And then there is that arm-waving motion. If you watch some of my other work, I also say "now" and "okay" way too many times. All crutch words....those are words when your brain can't think of the next thing to say. I cringe when I look at some of my older videos as well as this one! :-(

How to Wire a 4 Way Switch
Posted by: AsktheBuilder

Video duration: 317 seconds

http://www.AsktheBui lder.com host Tim Carter demonstrates how to wire a 4 way switch and where to place a 4 way switch in a circuit.

Related: askthebuilder, carter, diy, electrical, home, house, howto, light, lighting, switch, tim, way

Display Video Comments | Hide Video Comments | Add Comment

Latest comments made on this video:

4 way switch = ...
By: fivealivevidz. on 23 Nov 08, 23:42:08
4 way switch = Intermediate Switch (UK) 3 way switch = 2 way switch (UK)

Thanks for your ...
By: AsktheBuilder. on 10 Nov 08, 17:19:18
Thanks for your kind words. As for the gritchers, that's what I call them, I feel the same way, but would have said it using different words. :->

Thanks Tim, your ...
By: tikolyco. on 10 Nov 08, 16:42:43
Thanks Tim, your video tutorials are a great way to learn, Thanks for putting them up for free. and to everyone else out there who likes to bitch and moan... if you don't like it or think you can do it better, then don't watch it or go make your own god damn video... its all free so you have no right to bitch about anything.

IF it makes anyone ...
By: tikolyco. on 10 Nov 08, 16:39:36
IF it makes anyone feel better, I staple them 12'' or closer and I always pass inspection... unless its over 12'' then it wont pass, but i doable check everything.

NEC states that ...
By: WildstarGoethe. on 04 Nov 08, 03:56:15
NEC states that romex is to be secured 12 inches from the box. In practice, however, it is best to secure the cable less than 12 inches...Remember visuals are important...make your work very clean. I try to staple about 6 inches from the box, just so the inspector doesn't have to second guess. If you're stapling distance is borderline on that 12 inches, the inspector will be more inclined to henpeck the rest of your work. Take pride in your craft and it will show. Inspector's notice this stuff.

I'm really confused ...
By: AsktheBuilder. on 02 Nov 08, 10:55:52
I'm really confused. In the video I staple the cables in accordance with the code. I was very careful to do everything to current code standards.

I work for an ...
By: ryanbreeze. on 02 Nov 08, 01:50:20
I work for an electrical supply store and that's just what the guys have said..it's just you said "that'll pass inspection and i didn't want anyone dumb enough to take it to heart to get in trouble. again thanks for all the vids

The code used to be ...
By: AsktheBuilder. on 31 Oct 08, 10:42:31
The code used to be 6 inches or less if I'm not mistaken. What does your NEC book tell you? You do have a copy of that, don't you? If not, you should if you're doing electric work on a routine basis.

i enjoy all your ...
By: ryanbreeze. on 31 Oct 08, 02:09:45
i enjoy all your videos i just thought the wires have to be stapled 12 inches above the box to pass inspection? not a big deal thanks for all the help you've given out

Thanks! Yes, there ...
By: AsktheBuilder. on 29 Oct 08, 23:38:30
Thanks! Yes, there are so many haters and gritches out there. Sigh! And to think this information is here at no cost. Can you imagine what they would say if they had paid? Yeeeouuuuch!

reading the ...
By: jwboll. on 29 Oct 08, 23:27:36
reading the comments, seems like everyone needs to bitch about something! Thanks for the Video. It probably saved me hours, (I'll never know, Installed in minutes!)

Now this is the way ...
By: rhblakeman. on 26 Oct 08, 22:54:10
Now this is the way to explain it, took me eons to actually figure out that it was a special switch between a set of 3 ways. As far as 120v killing someone, it's current and the path it takes. Stand in water and grab a live line - current passes from your arm to your feet and your heart is in between. Sit in a tub and toss in a radio - the water you are in conducts to your body and grounds to the plumbing and passes thru your heart. Doesnt take much voltage (pressure) but rather current (flow)

You are correct, ...
By: wartexmaul. on 12 Oct 08, 04:15:00
You are correct, however you should know that neutral is grounded at the stepdown transformer and every x miles afterwards.

Hi Tim! Great stuff ...
By: PaulRyanJr. on 06 Oct 08, 05:30:46
Hi Tim! Great stuff this. Quick question. If you want a dimmer switch for incandescent lights instead of one of the three switches you show, does it have to take the place of the 4-way switch, or is it okay to use an easier to find 3-way dimmer and replace one of the regular 3-way switches. And have it all work of course! Howdy from Denver.

These videos of ...
By: AsktheBuilder. on 04 Oct 08, 17:22:55
These videos of mine show basic concepts, not code issues. As I said before, you can and should do that with your own videos. I stated the warning in the beginning of the video. Watch it again.

We don't teach ...
By: supasparx. on 04 Oct 08, 16:59:29
We don't teach electrical installation to home owners in the UK it's illegal for any one other than a qualified,and registered electrician to carry out installation work. I am qualified,& registered not only to install but to test,inspect,teach & instruct with over 35 years experience in all aspects of the electrical industry. All I am saying is this, your videos should carry a warning that they are specific to the American/Canadian wiring regulations & not suitable for Europe, fair enough?

Have you got family ...
By: AsktheBuilder. on 04 Oct 08, 16:32:05
Have you got family or friends to bail you out? The methods shown in this video are correct for our switches. If we wanted UK switches over here, we would ship them in. I went to your channel and there are no videos there showing your electrical knowledge. You should channel your passion about the topic into a camera instead of the keyboard. Here we call that put up or shut up. :->

If I wired a ...
By: supasparx. on 04 Oct 08, 16:02:41
If I wired a circuit in the UK like Tim Carter does in th USA I could go to jail. American regulations are far far below UK standards This video should carry a warning USA only

1001rants, what? ...
By: Flakester1. on 28 Sep 08, 08:40:50
1001rants, what? Neutral and Ground are not the same. Neutral is generally the white wire and neutral is generally bare. Also, 120v can kill you. Of course people say amperage is what kills, BUT amperage is dependent on voltage. Since your body's resistance is variable due to diet, and other factors, 12v (yes 12) can kill you with a direct path to the heart under low resistance. In theory there is such thing as unlimited amperage under zero resistance.

Thanks for your ...
By: AsktheBuilder. on 28 Sep 08, 05:58:39
Thanks for your kind words.

yeah it makes it ...
By: joshton. on 27 Sep 08, 00:28:56
yeah it makes it easier and it dose not damage the screw.

volts dont kill you ...
By: joshton. on 27 Sep 08, 00:28:32
volts dont kill you amps do.

**to Jaimeg187** ...
By: 1001rants. on 17 Sep 08, 22:45:55
**to Jaimeg187** ground and neutral are the same

120V CANNOT &WILL ...
By: 1001rants. on 17 Sep 08, 22:44:18
120V CANNOT &WILL NOT KILL YOU CURRENT(AMPERES/AMPS) KILLS YOU (~5mA) in very basic english voltage is pressure only thing voltage will do when you touch it is push you away the avg circuit has 15A or 20A obviously much higher than 5mA which is why you cant put a paper clip in an outlet voltage alone no matter how high or low can not kill you but the brick wall you hit after touching a 600V wire will 120V will just make you say ouch if anything (thats not to say any of this is not dangerous)

Tim Carter is my ...
By: KingThorin. on 17 Sep 08, 20:25:22
Tim Carter is my hero!

Roof Flashing for Bathroom Fans
Posted by: AsktheBuilder

Video duration: 299 seconds

A roof flashing for bathroom fans can be easily installed with these tips from AsktheBuilder.com host Tim Carter. He'll walk you through the steps of locating the hole, cutting through your roof, positioning the roof flashing, trimming shingles and nailing it down. You'll be able to do your own roof flashing installation for bathroom fans without a problem with the information in this video.

Related: ask, bathroom, builder, carter, fans, flashing, for, home, house, how, roof, tim, to

Display Video Comments | Hide Video Comments | Add Comment

Latest comments made on this video:

Sorry, I'd have to ...
By: AsktheBuilder. on 22 Nov 08, 17:13:39
Sorry, I'd have to be there to see it to give you a bullet-proof response.

but is it easy ...
By: vamarianne. on 22 Nov 08, 16:55:50
but is it easy enough to take cap off and then replace? we don't have to cut a new hole as there is already one there. thanks much. p.s. we are doing this today, so hope to see a response! :)

Same technique. ...
By: AsktheBuilder. on 22 Nov 08, 14:58:31
Same technique. Make the slit in the metal roof half way up the flashing. The slit in the roof is exactly the same width as the flashing.

Informative. Thanks ...
By: vamarianne. on 21 Nov 08, 22:26:53
Informative. Thanks! Any experience w. metal roofs? We need to replace a duct vent that vents straight up from 1st floor dryer up through 3rd floor utility closet to metal (sloped) roof. Somewhere along the length, its become disconnected and does not vent properly. We'd like to use existing roof vent cap. Is it pretty straighfwd to remove vent so we can pull out old duct and slide in new one? Concerned about keeping metal roof integrity as it was just scraped and resealed this summer. thanx!

You sure are ...
By: AsktheBuilder. on 14 Oct 08, 11:04:45
You sure are confusing me. Your first comment states that I did the job wrong - and that you have a different method. Uploading a video to YouTube is easier than installing one asphalt shingle. Since you have a lifetime of roofing experience, you should share it. Are you going to take your knowledge to the grave with you? That's unacceptable in today's world. Surely you can take the time to do it if I done it. It's our obligation.

I agree with you, ...
By: eastcoastman. on 14 Oct 08, 01:58:12
I agree with you, the flashing is working properly and it is not leaking because the pitch of the roof lets the water go fast and the snow does not stand as on a low slope roof. i've done roofing half of my life and what i wrote is based on my experience, sometimes sealant might not be necessary but doing so give peace of mind. Instead of caulking, there a large variety of products, i use ice-guard around every pipe, chimney, flashings, i.e. Unfortunately i've never loaded videos or pictures.

Thanks for your ...
By: AsktheBuilder. on 14 Oct 08, 00:03:23
Thanks for your comment. This flashing doesn't leak. It's been in for several years through driving rain and deep snow. I went to your channel and there's nothing there. If you are an expert roofer, how about sharing your knowledge with videos? Show us your methods. The method for installing the flashing in slate or wood shakes is the same. If you disagree, then tape your own video showing us how you do it.

i'd like to see ...
By: eastcoastman. on 13 Oct 08, 23:38:10
i'd like to see this professional man installing those things either on slate roofs or cedar shakes, LoL. Another thing, in the video he missed some important details as using caulking on the top part of the flashing. In winter time, it might leak, guess why?, well, snow accumulate on the top part of the pipe, later ice damns start growing under shingles, the purpose of the caulking is to stop those damns. he used caulking on exposed nails only!!, no good.

Indeed they are. ...
By: AsktheBuilder. on 11 Oct 08, 00:26:29
Indeed they are. Rock is not too bendable, unless it is heated to about 1,500 F and under maybe 50 atmospheres of pressure.

you are lucky you ...
By: remoman. on 10 Oct 08, 23:06:39
you are lucky you have such pliable shingles! I have slate shingles on my house, a real PITA to work with.

It's more than just ...
By: AfeBahrooshe. on 29 Aug 08, 15:59:03
It's more than just "my idea". It is taught in journeyman school, it's on their tests, and if you're a roofer by trade, you would never dare do a roof without gumming the valleys, chimneys, vents, and so on. Similar to vinyl siding - you would never do a job without papering it all first. Especially on lower slopes, water creeps under shingles and vents. A gum bead pushes it back out. That's all I can say.

There are hundreds ...
By: AsktheBuilder. on 29 Aug 08, 00:47:12
There are hundreds of thousands of roofs out there that have all of those things and *no* gum that are leak-free. I am not saying your idea is bad. I am trying to get you to have an open mind about the facts. If I have no gum and no leaks, then why must I do it? Don't answer that you think it is a good idea. Answer with some hard science.

I'm all for ...
By: AfeBahrooshe. on 28 Aug 08, 23:10:16
I'm all for agreeing there is more than one way to do a task. However, roofing gum is a must in areas vents, chimneys, valleys, etc. Skipping this step is not a smart thing to do. It's cheap and lazy.

How much time? More ...
By: AsktheBuilder. on 27 Aug 08, 10:41:08
How much time? More than 25 or 30 years? I have many vent flashings like that installed on my roof, and they have been there since day one. No leaks. I suggest that you consider there is more than one right way to do something. Keep in mind that regular shingles in the field do not leak, and each tab is not sealed as you suggest.

Give it time, it ...
By: AfeBahrooshe. on 27 Aug 08, 05:32:49
Give it time, it will leak. Water will creep up under the flashing and in the house it goes - unless there's a bead of gum stopping it from doing so.

Gosh, I have bad ...
By: AsktheBuilder. on 23 Aug 08, 00:09:18
Gosh, I have bad news for you. You are wrong. You are welcome to come here to view the vent and the ceiling below. In fact, there are no less than 10 similar flashings exactly like that on my roof. No blackjack and not a drop of a leak, even in the most fierce wind/rain storm.

There is a very ...
By: AfeBahrooshe. on 22 Aug 08, 22:41:59
There is a very significant step you missed Tim. Blackjack or "roofing gum" MUST be applied, every single time. If you miss this step, your vent WILL leak 100% guaranteed. You must apply a bead of "gum" underneat the vent, and on top where the upper shingles rest on it. Because of this vital step that was missed, I can't give this tutorial more than a 50% for usefulness. Sorry.

That's the way I do ...
By: rhblakeman. on 09 Aug 08, 02:01:05
That's the way I do it but the way Tim has it will work well.

I have to agree ...
By: rhblakeman. on 09 Aug 08, 01:59:53
I have to agree with Tim - those flashing cements are goo for about 2 yrs then Noah's flood comes. One thing you might mention Tim is to have the vent always above the fan and no drops in the hose or you get condensation that gets nasty, sometimes ices up. Can even become enough that it will get into the fan or ceiling. I usually use Blackjack under the flashing before laying the shingles back and a spot to replace the old tar strip so the shingles dont blow up if the shingles dont re-adhere.

Eat more Wheaties.
By: AsktheBuilder. on 08 Aug 08, 11:40:16
Eat more Wheaties.

Hey this is great, ...
By: wlaukaitis. on 07 Aug 08, 18:16:37
Hey this is great, I need to install one of these, the moron that I had install the bathroom fan just has the hose pointing towards the soffits, now I see dark spots on the wood!! Now I just need to grow the cojones to go up there and cut a 6" hole in my roof!! Thanks and I'll be coming here for more instruction!!

You are most ...
By: AsktheBuilder. on 10 Jun 08, 13:39:23
You are most welcome. More videos are in the works.

Great instructional ...
By: Marginal391. on 10 Jun 08, 12:56:05
Great instructional video. Thank you AsktheBuilder :-)

just a lil tip you ...
By: joefo53. on 12 Apr 08, 00:30:46
just a lil tip you should put the next row of shingles over the vent as well... stop any leaks... time over time i have had to repair leaky vents done this why..

Yes. You can use ...
By: AsktheBuilder. on 02 Apr 08, 21:36:06
Yes. You can use screws. I see nothing wrong with that.

How to Install a Kitchen Faucet
Posted by: AsktheBuilder

Video duration: 250 seconds

http://www.AsktheBui lder.com host Tim Carter demonstrates how to install a kitchen faucet. Putting in your own kitchen faucet isn't as hard as you think. This video walks you through hooking up the waterlines and a veggie sprayer.

Related: askthebuilder, building, carter, diy, faucet, faucets, home, house, howto, install, installation, kitchen, projects, remodeling, tim

Display Video Comments | Hide Video Comments | Add Comment

Latest comments made on this video:

thanks for the help!
By: hockey2333. on 29 Nov 08, 17:43:46
thanks for the help!

Congratulations! I ...
By: AsktheBuilder. on 24 Nov 08, 19:36:39
Congratulations! I love hearing back the success stories. Remember to check for pinhole leaks in the supply lines. They can be troublesome.

the muscle came in ...
By: bugsycline. on 24 Nov 08, 18:59:29
the muscle came in the form of a drill and a screw driver. all is well, thanks for the help. I installed a new faucet and a new garbage disposal. the quote from two plummers was around $1,000 I spent $150 in parts and did it my self in two hours!

when all else fails ...
By: bugsycline. on 24 Nov 08, 03:02:30
when all else fails "use force" lol

Bring in more ...
By: AsktheBuilder. on 24 Nov 08, 02:30:19
Bring in more muscle.

no amount of muscle ...
By: bugsycline. on 24 Nov 08, 02:13:45
no amount of muscle seems to remove the plastic nuts from the old faucet when using the basin wrench..... any suggestions>?

Thanks! Don't throw ...
By: AsktheBuilder. on 14 Sep 08, 09:54:26
Thanks! Don't throw the towel in on all upcoming challenges. Some things you may be able to do with just a little practice.

Now THIS was a ...
By: garlandbob. on 14 Sep 08, 03:43:54
Now THIS was a video that I needed to see for some encouragement and positive reinforcment that I can indeed to this. I replaced my bathroom faucets about 10 years ago and it was a booger. At 40 now, I'm too lazy to do this DIY stuff, but I do love a challenge. I'd rather pocket the savings from having a pro do it; so thanks for the video. Good job!!! Robert

No S-trap...... You ...
By: AsktheBuilder. on 27 Aug 08, 11:04:07
No S-trap...... You need to watch the drain video for this sink...Jaykob85, you seem to know a little about plumbing. I went to your channel and there are no videos of yourself sharing your knowledge. Instead of spending all this time making comments on other people's videos, how about investing that time making your videos so we can comment about your techniques?

ahh the old delta ...
By: jaykob85. on 27 Aug 08, 02:54:35
ahh the old delta 100 with the steal nuts and shanks....finaly someone that knows plumbing, thats great oil based plumbers putty on granite it doesnt get much better than that, but what im more confused on is you used 600wog pro channel ball valves vs. regular stops and at the same time used braided stainless supplys then to finish it off the drain was through the floor and we all know what that means...... S-TRAP

Don't we all! How ...
By: AsktheBuilder. on 15 Jul 08, 02:17:43
Don't we all! How about *you* tape that video since you are a plumber. I have a huge list of my own videos I am doing. :->

I'm a plumber and ...
By: CigarsNbourbon. on 15 Jul 08, 02:05:47
I'm a plumber and wish every job was that easy! How about doing a video of taking an old faucet off? Maybe something like a Delta-100 from the 70's with rusted nuts that have to be split off.

You can substitute ...
By: AsktheBuilder. on 10 Jul 08, 00:11:59
You can substitute silicone caulk - clear. It is a little messy, but will not stain the granite.

Okay--I need to ...
By: LeesaA007. on 09 Jul 08, 23:19:09
Okay--I need to know what to do. I have black granite countertops. We bought the plumber's putty to put it on with...what should we do to get the job done TOMORROW? Do I have to worry if it is a black counter? Should I remove the existing faucet and seal it overnight? Sealing it makes it take longer time than we have. Thanks for the input!

Good advice! What I ...
By: AsktheBuilder. on 29 May 08, 18:08:45
Good advice! What I failed to say - darn it - is that I sealed the granite three times before we shot this video. That should be done no matter what sealant you use. I appreciate your comment and it always helps to have a second or third set of eyes!

Tim - Please do not ...
By: chetwalcott. on 29 May 08, 17:46:22
Tim - Please do not advise your listeners to use plumbers putty on that granite counter top. Plumber's putty is oil based and will cause a horrible discoloration on your granite. Use a silicone sealant to protect the counter top.

are you asking me? ...
By: jzajzz. on 29 May 08, 00:31:48
are you asking me? .. I"m no plumber.. I do sell plumbing supplies though.. I have some product knowledge.. as far as the work.. i leave that up to the plumbers..

HAHAHA, thanks alot!
By: drummerdude6485. on 28 May 08, 11:19:29
HAHAHA, thanks alot!

Maybe..... but that ...
By: AsktheBuilder. on 28 May 08, 01:00:34
Maybe..... but that is like me asking can I use something other than a drumstick to hit a drum skin......

Empty the cabinet ...
By: AsktheBuilder. on 28 May 08, 00:59:21
Empty the cabinet and get under there with a flashlight.

Tim, I need to do ...
By: ultrakool. on 28 May 08, 00:06:18
Tim, I need to do this project, however, there is a leak under the sink that's ruining the cabinet floor that I can't isolate. Any ideas?

Tim, Instead of ...
By: drummerdude6485. on 27 May 08, 21:28:19
Tim, Instead of putting in "Plumbers Putty," is there anything else you could use to secure your faucet? Thanks!

It can. It depends ...
By: AsktheBuilder. on 19 Apr 08, 11:51:57
It can. It depends on the water chemistry. Go to my website and read my past columns on Aggressive Water. In places with favorable chemistry, the copper inside the pipes gets coated with a lining of lime which prevents the loss of copper. Our bodies need a small amount of copper.

Hey- I don't know ...
By: coltrain210. on 19 Apr 08, 04:22:53
Hey- I don't know much about this stuff, but I watched yourvideo on roof moss and you said the copper kills the moss. Does copper from the copper piping erode with time and get into the water?

Don't even respond. ...
By: coltrain210. on 19 Apr 08, 04:20:10
Don't even respond. They sound unprofessional all on their own.

Exterior Door Insulation
Posted by: AsktheBuilder

Video duration: 324 seconds

Exterior door insulation is essential to keep out the elements. Tim Carter of AsktheBuilder.com walks you through the steps to ensure that your exterior door is insulated properly. Your exterior door will be sealed tight if you follow Tim's insulation tips about fiberglass insulation, spray foam insulation and flashing tape.

Related: ask, builder, carter, door, exterior, home, house, how, insulate, insulation, tim, to

Display Video Comments | Hide Video Comments | Add Comment

Lawn Mowers
Posted by: AsktheBuilder

Video duration: 180 seconds

Lawn mowers and lawn tractors are great machines and the latest models have some features worth checking out. New, fancy zero turn mowers and four wheel steer mowers can make mowing your lawn quicker and easier. Tim Carter of AsktheBuilder.com takes you through some of those new lawn mower features.

Related: askthebuilder, carter, deere, four, john, lawn, mower, mowers, steer, tim, tractors, turn, wheel, zero

Display Video Comments | Hide Video Comments | Add Comment

Latest comments made on this video:

great mowers. don't ...
By: TractorVideos. on 29 Nov 08, 23:21:52
great mowers. don't like the look of the 0 turn mower though

I got a zero turn ...
By: blackjack55551234. on 04 Nov 08, 02:13:58
I got a zero turn mower and I love it, I look forward to cutting the lawn.

lol, word whiners!! ...
By: suckerforsweettalk. on 16 Oct 08, 01:34:17
lol, word whiners!! just for that, you made my day! I am sooooo going to use that.

i want a zero turn ...
By: ryan2546. on 15 Oct 08, 01:37:59
i want a zero turn mower

LOL
By: 1949outboard. on 07 Oct 08, 02:01:01
LOL

hey dumbass, "it ...
By: 1949outboard. on 07 Oct 08, 01:59:37
hey dumbass, "it leaves divits" that is why you do a K turn at the end of the strip. stop trash talking z's

I work for a fella ...
By: 4chrissy. on 01 Oct 08, 08:02:59
I work for a fella that has a zero turn. Peronally...I think it's the worst thing ever made. Even on a flat,dry grass,whenever you "zero turn" it,at least one of the rear wheels tears up the grass and leaves me w/ divets. Forget cutting anything remotley damp with the zero turns either. It just tears up even more. Inclines of even a small grade? Forget it. It's basically a straight-a-way cutter,made for mile wide,non grass diveting,turns!

Commander. You are ...
By: AsktheBuilder. on 28 Sep 08, 13:27:18
Commander. You are way too passionate about this topic. Here is what I suggest. You have a YouTube account, now all you need is a video camera. Tape a video of yourself on your riding mower showing people how you cut grass and how people should maintain their existing mowers so they don't ever have to buy a new one. You are obviously wrapped around the axle, so go release that energy in a video of your own.

Your video ...
By: 99minerkc. on 28 Sep 08, 08:54:55
Your video demonstrates a NEW toy and discusses the pros and cons of it. You end the clip driving off to cut more grass, implying that you love your new toy, hence watchers may well too want to consider a "new" one! You started the video out with a nice JD(if ridden correctly can easily get the job done),but you more or less implied that it couldn't,you found a new model however that could! End result, consider spending more money!! I fail to see how I didn't get the point!

You missed the ...
By: AsktheBuilder. on 28 Sep 08, 05:39:41
You missed the point of the video.... What a shame.....

You need to learn ...
By: 99minerkc. on 27 Sep 08, 22:40:25
You need to learn how to mow a lawn!! I don't need a zero anything mower!! People just want newer and bigger toys!! LAME

Quite possibly. I ...
By: AsktheBuilder. on 19 Aug 08, 11:45:15
Quite possibly. I am not a fan of bagging. If you cut regularly, there is no need. You rarely see thatch buildup on golf courses and they never bag. I appreciate you kind words. There are many who feel the exact opposite. Here on YouTube we call them jealous faceless haters. :-> I sometimes add the word whiners. Oh well, you can't please everybody.

I can even tell you ...
By: babarox1998. on 19 Aug 08, 02:42:42
I can even tell you that some builders are rethinking the using of baggins systeme because of the same reason (and also because in many cases it didn't "bag" real well. By the way, I find you tips and comments very interesting and accurates. And also very funny (why should renovations and handwork be so boring...) It show you like what you do...

Exactly! Thanks for ...
By: AsktheBuilder. on 18 Aug 08, 00:06:22
Exactly! Thanks for spotting that oversight. I think this is the precise reason the manufacturers do not readily supply the connect point.

he said that ...
By: babarox1998. on 17 Aug 08, 21:47:16
he said that because the entire wwight would be in the rear, you'll have to counterbalance the weight in the front (which is not evident on this type of tractors...)

well yea duh....
By: etnies97229. on 17 Aug 08, 18:58:41
well yea duh....

assuming they have ...
By: AsktheBuilder. on 15 Aug 08, 23:36:56
assuming they have a place where you can connect it. Most do not have this.

you actually can ...
By: etnies97229. on 15 Aug 08, 23:31:37
you actually can pull a cart with the zero turn mowers.

If you buy a good ...
By: cheshboy. on 12 Aug 08, 15:41:05
If you buy a good quality American built mower like a Grasshopper or Hustler (with a lifetime guarantee on the deck and frame) you will have a great piece of equipment with longevity.

I wish my lawn was ...
By: SuperSmashBrosBrawI. on 13 Jun 08, 16:24:09
I wish my lawn was emo so it could cut itself :(

Its the song after ...
By: Animalpalace. on 29 May 08, 12:43:29
Its the song after he says 'Chazam!'

Well, one of the ...
By: Animalpalace. on 29 May 08, 12:42:39
Well, one of the songs is from iMovie.. xD

Sorry, try again!
By: AsktheBuilder. on 29 May 08, 10:51:54
Sorry, try again!

Made on Imovie..
By: Animalpalace. on 29 May 08, 01:31:27
Made on Imovie..

I can believe that ...
By: AsktheBuilder. on 25 May 08, 12:07:16
I can believe that would be an accessory. My old tractor has that bagging contraption. I use it to recycle leaves for mulch each fall. Works great.

Painting Kitchen Cabinets
Posted by: AsktheBuilder

Video duration: 212 seconds

Painting kitchen cabinets is an inexpensive way to make your kitchen cabinets look like new. Tim Carter from AsktheBuilder.com shares some tips for kitchen cabinet refinishing to save you frustration and give you professional results.

Related: ask, builder, cabinets, home, house, how, kitchen, paint, painting, to

Display Video Comments | Hide Video Comments | Add Comment

Latest comments made on this video:

dust mask?
By: person365. on 30 Oct 08, 23:14:03
dust mask?

Simple, read my ...
By: AsktheBuilder. on 12 Sep 08, 23:42:51
Simple, read my past columns about staining wood at my website.

say for some crazy ...
By: checkurhead801. on 12 Sep 08, 21:17:47
say for some crazy reason you dont want purple cabinets, i just want to sand mine down and finish the natural wood. they have already been painted white, how cold i go about doing that the right way.

You need to get ...
By: AsktheBuilder. on 21 Aug 08, 01:02:24
You need to get that grease off. There are good degreasers at the grocery store. I have used oxygen bleach with great success at degreasing. I loved it so much I did what the Orek Vacuum man did - I bought the company! go to oxygenbleach dot comma :->

Thanks for all the ...
By: xpinchx. on 21 Aug 08, 00:25:13
Thanks for all the tips. My cabinets are all very old and haven't been maintained properly. There's some sort of dirt/grease cover on all of the cabinets that is slightly sticky to the touch. I tried washing it off before with soap and water but it's too stuck on there. Will the deglosser take care of that or will I have to use some other product to help get rid of the sticky stuff?

A medium layer of ...
By: AsktheBuilder. on 19 Aug 08, 13:00:01
A medium layer of deglosser. Many paints can be scratched off within hours or days of application. But once they have cured completing the chemical and mechanical bond, it is very hard to remove them. Go try doing it on a piece of painted woodwork around your home.

Great Video! I ...
By: ladybugarden. on 19 Aug 08, 12:35:36
Great Video! I tried doing a few practice boards before I will use these techniques on all my cabinets. But, I can still scratch off the primer coat. How much Deglosser should I apply (I have the same brand as you). Should it be a thick wet layer, or a thin layer? Thanks so much for your reply.

You use whatever ...
By: AsktheBuilder. on 28 Jul 08, 22:06:50
You use whatever primer is called for on the label of the finish paint.

Do you need to use ...
By: delmarpainter. on 28 Jul 08, 16:23:10
Do you need to use oil base primer to prime cabinets?

HA YOURE TOO COOL! ...
By: zoopop22. on 14 Jul 08, 18:11:09
HA YOURE TOO COOL! THX !

High-gloss paint ...
By: AsktheBuilder. on 07 Jul 08, 17:45:31
High-gloss paint followed by high-gloss urethane.

I want to paint my ...
By: LoliLove7. on 07 Jul 08, 17:42:05
I want to paint my kitchen cabinets, but I want to get a very high gloss on them, what can I use?

No difference in ...
By: AsktheBuilder. on 23 Jun 08, 13:06:54
No difference in the finish. Beware of old finishes that have lead. Do not sand them. Use a primer. Read all of my past primer columns at my website to discover why.

Hello Tim Thanks ...
By: R3FuG33. on 23 Jun 08, 12:41:34
Hello Tim Thanks for the video! A couple of questions, aside from saving time/dust does using liquid sandpaper end with a better finish? (The cabinets are very greasy at points) I will be using TSP to scrub the cabinets down. Also, the local home depot advised me that with oil based paint I will not require a primer, is this true?

wow thanks
By: bczco2007. on 30 Apr 08, 16:11:35
wow thanks

Thank you Tim. I'm ...
By: hammerofharpel. on 10 Feb 08, 16:13:03
Thank you Tim. I'm always grateful you keep up with correspondences and reply with great information!

Hmmmmmm..... I just ...
By: AsktheBuilder. on 10 Feb 08, 13:02:56
Hmmmmmm..... I just watched the video again and must have missed where I said that. In a b-roll shot you can see a can of latex finish paint. In the columns about this topic on my website, I discuss why oil will allow you to get the kitchen back together faster. You may want to read my Painting Kitchen Cabinets columns.

Actually Tim, you ...
By: hammerofharpel. on 10 Feb 08, 04:16:36
Actually Tim, you said oil or latex and your daughter said oil only.

Me. Oil cures ...
By: AsktheBuilder. on 09 Feb 08, 19:33:53
Me. Oil cures harder and faster.

I don't know Tim. ...
By: hammerofharpel. on 09 Feb 08, 18:53:00
I don't know Tim. On her video she says you use OIL only. You say either. I'm personally trying outdoor Porter paint (latex). I despise Oil paint. Which person should I believe?

You can use either. ...
By: AsktheBuilder. on 31 Oct 07, 15:48:10
You can use either. Oil will cure harder and faster than acrylic. You should read my columns about Painting Kitchen Cabinets at my website for tons of information.

what about paint? ...
By: milokrm99. on 31 Oct 07, 15:08:29
what about paint? it looks like you are using latex? I was told to use oil based? Thanks

Any decent paint ...
By: AsktheBuilder. on 30 Oct 07, 20:29:27
Any decent paint store or hardware store. The brand is not too important. They all have nearly identical ingredients.

where do you get ...
By: milokrm99. on 30 Oct 07, 20:04:24
where do you get this liquid sandpaper? the brand name would also be nice to know.

In my opinion, he ...
By: AsktheBuilder. on 06 Oct 07, 11:59:07
In my opinion, he is wrong. A few years back I interviewed several top chemists who work for major paint companies. Finish paints bond better to primer if they are applied as soon as the primer is dry and is allowed to be re-coated. The label on cans of primer tell you when you can re-coat the paint.

How to Cut Ceramic Tile
Posted by: AsktheBuilder

Video duration: 170 seconds

Tim Carter, of http://AsktheBuilder .com, demonstrates a simple way to cut a circle out of the center of a piece of ceramic tile.

Related: ask, backsplash, bathroom, builder, carter, ceramic, circle, cut, hole, home, house, how, kitchen, saw, tile, tim

Display Video Comments | Hide Video Comments | Add Comment

Latest comments made on this video:

Good Tip. Doing ...
By: astchiefy. on 09 Nov 08, 05:30:36
Good Tip. Doing tile now and this is just what the doctor ordered

Furthermore, the ...
By: AsktheBuilder. on 07 Nov 08, 12:11:25
Furthermore, the purpose of the video was to show the average *homeowner* an inexpensive way to create the hole. Homeowners don't own expensive wet saws nor do they own a set of diamond-bit hole saws. They can buy a rod saw blade for next to nothing however. Thanks for jumping in with your comment.

casino007007 wrote: ...
By: Masowai. on 07 Nov 08, 01:42:57
casino007007 wrote: why you don't drill the hole much faster??? Masowai responded: Dude, he didn't drill it. In fact, a drill never made an appearance in this clip. You're retarded.

It's called ...
By: AsktheBuilder. on 09 Oct 08, 23:41:18
It's called Hollywood slow....

why you don't drill ...
By: casino007007. on 09 Oct 08, 23:33:49
why you don't drill the hole much faster???

No doubt. Earlier ...
By: AsktheBuilder. on 17 Aug 08, 12:00:33
No doubt. Earlier in the comments I mentioned how this video is for homeowners, not pros. Homeowners do not own grinders, wet saws and even nippers. But for *very* little money, they can buy a rod saw. Homeowners often have far more time than money, so they are reluctant to buy a tool for one-time use. And the cost to rent can be very high - to them - as well.

i think a grinder ...
By: gluebagblues. on 17 Aug 08, 04:59:28
i think a grinder and nippers would be a lot faster .

exacto knifes are ...
By: suprmario96. on 10 Jul 08, 15:20:36
exacto knifes are for paper only

Use a lockboy.
By: wannaseesumfun. on 09 Jul 08, 16:08:04
Use a lockboy.

It is alot easier ...
By: gav4010. on 30 Jun 08, 13:41:56
It is alot easier to use a drill. You can pick up an arrow head as the attachment and simply drill the hole.

OKAY, thanks alot! ...
By: drummerdude6485. on 28 May 08, 00:18:56
OKAY, thanks alot! I was just wandering.

I don't think so. ...
By: AsktheBuilder. on 27 May 08, 21:47:30
I don't think so. Those are razor knifes for artists.

I have been ...
By: drummerdude6485. on 27 May 08, 21:35:39
I have been wondering how they get those pipes, tubes, etc. through the tile. And would it be possible to use an "Exacto Knife?"

Wow, thanks so much ...
By: drummerdude6485. on 27 May 08, 21:35:03
Wow, thanks so much for this very cool video. I have been wondering how they get those pipes, tubes, etc. through the tile. And would it be possible to use an "Exacto Knife?" It is weird because I never seen them put on The Backsplash and have pipes, and tubes in the way!

it takes 10 ...
By: TileMasterGa. on 22 May 08, 19:06:32
it takes 10 secounds 4 me!!!

Surely it would ...
By: spermbank1. on 16 May 08, 10:30:03
Surely it would have been quicker to use a diamond drill bit the same size as the notch??

I love your videos, ...
By: Paveliux123. on 07 May 08, 17:31:56
I love your videos, You Sir help a lot for people ;)

It depends how hard ...
By: AsktheBuilder. on 01 May 08, 02:09:58
It depends how hard the tile is and how far away the grinder is. If it was soft tile, the cut would be made it 10 minutes with the rod saw.

How long would it ...
By: 21brian12. on 30 Apr 08, 22:40:17
How long would it take to cut out an opening for a toilet flange using this method? Would it even be feasible? Or would I be better off borrowing my fathers grinder? I need it to be as close to the flange as possible so I can use a super ring to tie the toilet down since the original flange is shot.

I agree on all ...
By: AsktheBuilder. on 19 Apr 08, 11:54:52
I agree on all points. Many homeowners can't afford a grinder. The rod saw, though slower, is affordable. The nippers or snips can have a tough time doing an inner-circle cut. They are fine for outside cuts, but you need a starting hole to be able to do an inside cut.

OMG.A ROD Saw ? Try ...
By: canofwhipass. on 19 Apr 08, 08:33:06
OMG.A ROD Saw ? Try a angle grinder with daimond blade.Cut lots of small lines into the area you want to remove & then use Ceramic Tile Snips. These Snips are also available in specail shape for round shapes. By doing this you will get job done a couple of days faster.

im a self employed ...
By: jocky102. on 31 Mar 08, 21:08:18
im a self employed tiler and was wondering whether or not the tiling stores in America actually offer to cut tiles for you at a cost of course (when i say *at a cost* i mean they do it for nearly free because they are making money from the sale anyway, you mark on the tile where it should be cut and take it into them, they cut it you save the cost of a cutter hire and get the cut you want.

i think the easiest ...
By: jocky102. on 31 Mar 08, 21:05:22
i think the easiest way if you dont know how to use the nippers is to take the guard off the wet cutter, everyone uses a wet cutter when tiling (diy or professional) and plunge the tile onto the blade, take your time though, if it is like your tile it is easy because you can see through the tile, then you can slowly turn the tile to create the curve your looking for. the nippers CAN be messy if you haven't already scored the tile with a rubi cutter.

If you live in New ...
By: AsktheBuilder. on 30 Mar 08, 13:51:40
If you live in New Hampshire, I might consider it..... I am getting ready to do a video on a small concrete walkway.

Tim, I enjoyed ...
By: asher1112. on 30 Mar 08, 13:41:59
Tim, I enjoyed your video and it will come in handy when I tackle my bathroom soon. Do you make house calls? Just joking and keep up with the great videos. Do you have any videos on pouring concrete,preforms and such?

Pot Filler Faucet
Posted by: AsktheBuilder

Video duration: 226 seconds

Tim Carter, of http://AsktheBuilder .com, shows how to install a pot filler faucet above a cook top.

Related: ask, boil, builder, carter, cook, faucet, filler, home, house, install, kitchen, pot, spill, tim, tips, top, water

Display Video Comments | Hide Video Comments | Add Comment

Latest comments made on this video:

IM glad i watched ...
By: MrVening. on 28 Oct 08, 16:25:06
IM glad i watched this

urWLCM :->
By: AsktheBuilder. on 09 Oct 08, 10:53:02
urWLCM :->

thNX
By: varibev. on 09 Oct 08, 02:44:54
thNX

i totally had the ...
By: jasonguyperson. on 08 Oct 08, 05:46:19
i totally had the wrong impression about this video from just the title.. lol

Great ?s! No ...
By: AsktheBuilder. on 02 Oct 08, 23:02:06
Great ?s! No offense at all as you are most polite. There is solid 2x blocking behind the tile at that location. The lug ell fitting screwed to it and then I placed another block over that that had a hole drilled slightly larger than the diameter of the fitting. Never hammer drill tile. Never ever....... Just use a new regular bit. Once it cuts into the glaze, the rest is easy. Porcelain tile though is tougher. You often need diamond bits.

Tim I think you do ...
By: lostc0z. on 02 Oct 08, 22:55:18
Tim I think you do an awesome job of explaining things to us all. On this paticular "Pot-Filler" job I was wondering if you had put wooden supports not only to hold the brass dropped eared 90' but what exactly did those screws anchor to on the hidden retention ring? Did you install another stud behind the drywall? How bout' drilling thru tile did your drill happen to have "hammer-action"? Again I'm not being sarcastic I really like your work but these are just ?'s that I don't see answered.

he could have a ...
By: Axenmoon. on 21 Aug 08, 19:53:22
he could have a GFCI in series with the outlet

It depends on the ...
By: silverojo. on 30 Jun 08, 05:18:35
It depends on the area where you live. In Arizona, for instance, gas stoves are about as rare as desert blizzards. :-)

There is no danger. ...
By: AsktheBuilder. on 12 Jun 08, 18:11:43
There is no danger. As far as people using gas stoves, there are *millions* here in the USA.

No way I'm putting ...
By: gschjetne. on 12 Jun 08, 16:50:57
No way I'm putting a faucet over a piece of electrical equipment! I don't know of many people who still uses a gas range in a house...

Sure. Many other ...
By: AsktheBuilder. on 28 May 08, 01:01:55
Sure. Many other commercial kitchens.

Isn't it sometimes ...
By: drummerdude6485. on 28 May 08, 00:22:32
Isn't it sometimes used in various places?

Correct. Many ...
By: AsktheBuilder. on 25 May 08, 22:07:39
Correct. Many Chinese restaurants have the gutter at the stove. You can see them rinse the woks just after they cook.

Convenient, ...
By: DWRead. on 25 May 08, 20:48:56
Convenient, although it doesn't completely eliminate carrying the water-filled pot. You still have to schlep it back to the sink when you're done. Unless... I saw one such faucet in a restaurant kitchen. The cooktop had a gutter leading to a drain. Not for dumping huge volumes of water (not deep enough), but for quick rinsing of pots and pans.

no worries - Thanks ...
By: AsktheBuilder. on 17 Apr 08, 18:27:49
no worries - Thanks for the comment.

RGR... after i ...
By: sirbata. on 17 Apr 08, 18:14:01
RGR... after i posted.. i realized it must be. Thank you for the vids.

It is, but a ...
By: AsktheBuilder. on 17 Apr 08, 16:16:03
It is, but a downstream one from the one than has the buttons.

THat outlet to the ...
By: sirbata. on 17 Apr 08, 15:37:57
THat outlet to the left should be GFI

Why would you make ...
By: AsktheBuilder. on 10 Apr 08, 01:00:15
Why would you make that statement? My guess is that you think you will be out of work. You should look at the facts: 78% of people are NOT DIYrs. Those that are have no intention of hiring a pro unless they absolutely have to. I urge you to abandon your Scarcity mindset and take a huge swig of Abundance Juice. When you give away your knowledge all sorts of good things will happen.

come on no do it ...
By:

Home Office FurnitureVideos

Watching: Watching: Kitchen remodeling ideas